DMX512 CC driver 350mA 700mA 4CH

Introduction:

       YM-HDC4P is a Constant current address DMX512 Decoder for RGBW 4 channels high power led lights. By advantage of advanced coding technology, the unit is compatible with international DMX512/1990 standards, which decodes the international popular digital control signals into a PWM signal to drive RGBW LED lights. Each channel can be controlled with 256 level gray-scales.

Specification and Parameter:

Features:

1. Perfectly compatible with international DMX512/1990 standards.

Widely voltage: DC12V-DC36V,

Support UC ITT DMX512/1990, and extended DMX512, 250Kbs-500Kbs auto adjust.

Grey level 65536, fresh rate 3980Hz,

Each DMX driver has relay function,

1. Differential signal transmission, support 3 mode of data transmission:

3.Display effects:
     If connected to DMX512 led controller or DMX512 console, the effects will follow the DMX512 led controller or DMX512 console, and change color per their commands.
      If not connected to DMX512 led controller or DMX512 console, the effects will for pre-load program in side of the decoder.

4.Connection in Parallel
Each decoder is connected on DMX512 signal bus in parallel. It is recommended that signal amplifiers should be used for every 32 pcs of decoders in case of signal drop(Attenuation).

5.Strong anti-interference ability, anti-static and prevent lightening design.

Application:

   LED project light, LED Wall washer, LED ground light, LED Ceiling light, Channel light, LED Guardrail tube, full color RGB lights and LED point source lights.

Input & Output:

​